动作即Action，类如其名，它主要是用来改变Node对象的属性，Action对象是随着时间改变Node的属性。任何一个以Node为基类的对象都有可执行的动作对象。
例如，你可以在一个时间段内将Sprite精灵从一个位置移动到另一个位置。
如下为MoveTo和MoveBy两个动作的实例:
// Move sprite to position 50,10 in 2 seconds.
auto moveTo = MoveTo::create(2, Vec2(50, 10));
mySprite1->runAction(moveTo);
// Move sprite 20 points to right in 2 seconds
auto moveBy = MoveBy::create(2, Vec2(20,0));
mySprite2->runAction(moveTo);
By和To的区别
或许你已经注意到了每个动作都有By和To两个状态。为什么呢?因为它们所执行的结果是不同的。By相当于这个节点是相对的。To是绝对的，意思是它并不考虑到这个节点的当前状态。让我们看一个具体的例子：
auto mySprite = Sprite::create("mysprite.png");
mySprite->setPosition(Vec2(200, 256));
// MoveBy - lets move the sprite by 500 on the x axis over 2 seconds
// MoveBy is relative - since x = 200 + 200 move = x is now 400 after the move
auto moveBy = MoveBy::create(2, Vec2(500, mySprite->getPositionY()));
// MoveTo - lets move the new sprite to 300 x 256 over 2 seconds
// MoveTo is absolute - The sprite gets moved to 300 x 256 regardless of
// where it is located now.
auto moveTo = MoveTo::create(2, Vec2(300, mySprite->getPositionY()));
auto seq = Sequence::create(moveBy, delay, moveTo, nullptr);
mySprite->runAction(seq);
基本动作以及如何执行动作
基本动作通常是一个单一的动作，只完成一个目标。让我们看看几个例子：
移动(Move)
在规定的时间内移动Node的位置。
auto mySprite = Sprite::create("mysprite.png");
// Move a sprite to a specific location over 2 seconds.
auto moveTo = MoveTo::create(2, Vec2(50, 0));
mySprite->runAction(moveTo);
// Move a sprite 50 pixels to the right, and 0 pixels to the top over 2 seconds.
auto moveBy = MoveBy::create(2, Vec2(50, 0));
mySprite->runAction(moveBy);
旋转(Rotate)
在2秒内顺时针旋转Node。
auto mySprite = Sprite::create("mysprite.png");
// Rotates a Node to the specific angle over 2 seconds
auto rotateTo = RotateTo::create(2.0f, 40.0f);
mySprite->runAction(rotateTo);
// Rotates a Node clockwise by 40 degree over 2 seconds
auto rotateBy = RotateBy::create(2.0f, 40.0f);
mySprite->runAction(rotateBy);
缩放(Scale)
在两秒内将Node放大10倍
auto mySprite = Sprite::create("mysprite.png");
// Scale uniformly by 3x over 2 seconds
auto scaleBy = ScaleBy::create(2.0f, 3.0f);
mySprite->runAction(scaleBy);
// Scale X by 5 and Y by 3x over 2 seconds
auto scaleBy = ScaleBy::create(2.0f, 3.0f, 3.0f);
mySprite->runAction(scaleBy);
// Scale to uniformly to 3x over 2 seconds
auto scaleTo = ScaleTo::create(2.0f, 3.0f);
mySprite->runAction(scaleTo);
// Scale X to 5 and Y to 3x over 2 seconds
auto scaleTo = ScaleTo::create(2.0f, 3.0f, 3.0f);
mySprite->runAction(scaleTo);
淡入淡出
Node淡入
FadeIn修改透明度的值(0~255之间)。与之相反的动作是“淡出”
auto mySprite = Sprite::create("mysprite.png");
// fades in the sprite in 1 seconds
auto fadeIn = FadeIn::create(1.0f);
mySprite->runAction(fadeIn);
// fades out the sprite in 2 seconds
auto fadeOut = FadeOut::create(2.0f);
mySprite->runAction(fadeOut);
色调(Tint)
Tint使节点的NodeRGB从当前值改变到用户设置值。
auto mySprite = Sprite::create("mysprite.png");
// Tints a node to the specified RGB values
auto tintTo = TintTo::create(2.0f, 120.0f, 232.0f, 254.0f);
mySprite->runAction(tintTo);
// Tints a node BY the delta of the specified RGB values.
auto tintBy = TintBy::create(2.0f, 120.0f, 232.0f, 254.0f);
mySprite->runAction(tintBy);
动画(Animate)
通过Animate可以很容易地实现精灵的帧动画效果。只要简单的每隔一段时间替换_display frame_即可。如下例子：
auto mySprite = Sprite::create("mysprite.png");
// now lets animate the sprite we moved
Vector animFrames;
animFrames.reserve(12);
animFrames.pushBack(SpriteFrame::create("Blue_Front1.png", Rect(0,0,65,81)));
animFrames.pushBack(SpriteFrame::create("Blue_Front2.png", Rect(0,0,65,81)));
animFrames.pushBack(SpriteFrame::create("Blue_Front3.png", Rect(0,0,65,81)));
animFrames.pushBack(SpriteFrame::create("Blue_Left1.png", Rect(0,0,65,81)));
animFrames.pushBack(SpriteFrame::create("Blue_Left2.png", Rect(0,0,65,81)));
animFrames.pushBack(SpriteFrame::create("Blue_Left3.png", Rect(0,0,65,81)));
animFrames.pushBack(SpriteFrame::create("Blue_Back1.png", Rect(0,0,65,81)));
animFrames.pushBack(SpriteFrame::create("Blue_Back2.png", Rect(0,0,65,81)));
animFrames.pushBack(SpriteFrame::create("Blue_Back3.png", Rect(0,0,65,81)));
animFrames.pushBack(SpriteFrame::create("Blue_Right1.png", Rect(0,0,65,81)));
animFrames.pushBack(SpriteFrame::create("Blue_Right2.png", Rect(0,0,65,81)));
animFrames.pushBack(SpriteFrame::create("Blue_Right3.png", Rect(0,0,65,81)));
// create the animation out of the frames
Animation* animation = Animation::createWithSpriteFrames(animFrames, 0.1f);
Animate* animate = Animate::create(animation);
// run it and repeat it forever
mySprite->runAction(RepeatForever::create(animate));
很难以文字形式描述一个动画，所以请运行《开发者指南示例》中动作部分的代码查看动作效果。
减速(Easing)
Easing用一个给定的加速度来使动画更加顺畅。需要记住的是，无论速度快慢，ease动作总是同时开始和结束。在游戏中如果你想模拟一些物理特效，但又不想过度且麻烦地使用多个非常基本的动作，那么此时Ease动作将是模拟物理特效的一个很好的方法。这里有另一个给菜单和按钮添加动画的很好的例子。
下图显示了一些常用的减速功能：
Cocos2d-x支持上图中所显示的大部分减速功能。这些功能也是容易实现的。让我们一起看看一个特殊的用例。屏幕的上方添加一个Sprite对象，并使其上下跳动。
// create a sprite
auto mySprite = Sprite::create("mysprite.png");
// create a MoveBy Action to where we want the sprite to drop from.
auto move = MoveBy::create(2, Vec2(200, dirs->getVisibleSize().height - newSprite2->getContentSize().height));
auto move_back = move->reverse();
// create a BounceIn Ease Action
auto move_ease_in = EaseBounceIn::create(move->clone() );
// create a delay that is run in between sequence events
auto delay = DelayTime::create(0.25f);
// create the sequence of actions, in the order we want to run them
auto seq1 = Sequence::create(move_ease_in, delay, move_ease_in_back,
delay->clone(), nullptr);
// run the sequence and repeat forever.
mySprite->runAction(RepeatForever::create(seq1));
运行“开发者指南示例”中的这部分的代码可以查看动作效果。
序列动作以及如何执行它
Sequence可以使一系列的动作对象按顺序执行。这一系列对象可以是任何数量的动作对象、函数，甚至是另外一个序列动作。函数?是的!Cocos2d-x中有一个CallFunc对象，它允许你创建一个function()函数并可以传递到Sequence中执行。这就允许你在序列动作对象中添加自己的函数功能，而不是仅仅局限于Cocos2d-x中提供的动作对象。如下例为序列动作被执行时的状态：
序列动作的例子
auto mySprite = Sprite::create("mysprite.png");
// create a few actions.
auto jump = JumpBy::create(0.5, Vec2(0, 0), 100, 1);
auto rotate = RotateTo::create(2.0f, 10);
// create a few callbacks
auto callbackJump = CallFunc::create([](){
log("Jumped!");
});
auto callbackRotate = CallFunc::create([](){
log("Rotated!");
});
// create a sequence with the actions and callbacks
auto seq = Sequence::create(jump, callbackJump, rotate, callbackRotate, nullptr);
// run it
mySprite->runAction(seq);
那么，Sequence对象做了什么呢?
它可以按顺序执行如下动作：
Jump -> callbackJump -> Rotate -> callbackRotate
运行“开发者指南示例”中的代码查看动作效果。
Spawn
Spawn与Sequence类似，不同的是使用Spawn时所有动作是同时执行的。你可以有很多动作对象，甚至其他Spawn对象。
Spawn的作用与运行多个连续的runAction()语句所产生的结果是相同的。然而，使用Spawn的优点在于你可以将其放到一个序列中，从而实现特定的效果。而runAction()是不可以的。将Spawn和Sequence结合使用讲会实现很多强大的功能。
举例：
// create 2 actions and run a Spawn on a Sprite
auto mySprite = Sprite::create("mysprite.png");
auto moveBy = MoveBy::create(10, Vec2(400,100));
使用Spawn:
// running the above Actions with Spawn.
auto mySpawn = Spawn::createWithTwoActions(moveBy, fadeTo);
mySprite->runAction(mySpawn);
使用连贯的runAction()语句：
// running the above Actions with consecutive runAction() statements.
mySprite->runAction(moveBy);
mySprite->runAction(fadeTo);
两个产生的效果是相同的。但是，其中一个可以在Sequence中使用Spawn。如下流程图所示：
// create a Sprite
auto mySprite = Sprite::create("mysprite.png");
// create a few Actions
auto moveBy = MoveBy::create(10, Vec2(400,100));
auto fadeTo = FadeTo::create(2.0f, 120.0f);
auto scaleBy = ScaleBy::create(2.0f, 3.0f);
// create a Spawn to use
auto mySpawn = Spawn::createWithTwoActions(scaleBy, fadeTo);
// tie everything together in a sequence
auto seq = Sequence::create(moveBy, mySpawn, moveBy, nullptr);
// run it
mySprite->runAction(seq);
运行“开发者指南示例”中的代码查看动作效果。
Reverse(逆序)
Reverse的作用完全像它的名字一样，例如运行一系列动作时，你完全可以调用reserve()函数使动作逆序执行。然而，这并不只是简单的逆序运行，实际上还将原始的Sequence和Spawn的属性也转换为逆序。
Using the Spawn example above reversing is simple. 上面Spawn中的例子使用逆序就会很简单：
// reverse a sequence, spawn or action
mySprite->runAction(mySpawn->reverse());
大部分Action和Sequence对象都是可逆的!
使用很简单，但是让我们来验证一下是不是这样，如下：
// create a Sprite
auto mySprite = Sprite::create("mysprite.png");
mySprite->setPosition(50, 56);
// create a few Actions
auto moveBy = MoveBy::create(2.0f, Vec2(500,0));
auto scaleBy = ScaleBy::create(2.0f, 2.0f);
auto delay = DelayTime::create(2.0f);
// create a sequence
auto delaySequence = Sequence::create(delay, delay->clone(), delay->clone(),
delay->clone(), nullptr);
auto sequence = Sequence::create(moveBy, delay, scaleBy, delaySequence, nullptr);
// run it
newSprite2->runAction(sequence);
// reverse it
newSprite2->runAction(sequence->reverse());
发生了什么呢?如下步骤清单或许对我们有帮助：
创建mySprite
设置mySprite位置为(50,56)
开始运行sequence
在两秒内sequence将mySprite移动了500个像素，mysprite新位置为(550,56)
sequence延迟2秒
在两秒内sequence将mySprite扩大两倍
延迟了6秒多(注意，这里我们运行了另外一个sequence来完成这个)
在sequence上运行一reverse，因此我们可以向后重新运行每个动作。
sequence被延迟了6秒
在2秒内sequence将mySprite扩大了两倍
sequence延迟了两秒
在两秒内，sequence移动mySprite了-500个像素，mySprite的新位置为(50,56)
你可以看到reverse()用起来很简单，但是其实逻辑上并不简单。Cocos2d-x已经为你完成了这复杂的逻辑。
